{"id":9276,"date":"2026-10-20T14:09:50","date_gmt":"2026-10-20T12:09:50","guid":{"rendered":"https:\/\/lorit-consultancy.com\/en\/?p=9276"},"modified":"2026-10-20T14:12:15","modified_gmt":"2026-10-20T12:12:15","slug":"iec-60664-insulation-coordination-challenges","status":"publish","type":"post","link":"https:\/\/lorit-consultancy.com\/en\/2026\/10\/iec-60664-insulation-coordination-challenges\/","title":{"rendered":"Navigating the Complexities of IEC 60664: Key Challenges and Open Questions"},"content":{"rendered":"

A practical look at PCB insulation, creepage and clearance distances, high-frequency design, particle contamination, and conformal coating.<\/h2>\n

Following another fantastic IEC 60664 training course<\/a> last week, our team was once again met with a series of probing questions from attendees. It’s clear that IEC 60664 is the cornerstone of insulation coordination across many industries and plays a key part in critical product standards such as IEC 60601<\/a> (medical electrical equipment) and IEC 61010<\/a> (electrical equipment for measurement, control, and laboratory use). However, it still presents several significant hurdles for modern designers.<\/p>\n

During our discussions, a few major pain points and open questions consistently came to the surface. Here is a look at some of the primary challenges associated with the standard today, <\/span><\/span>and why an update is long overdue.<\/p>\n

1. PCB Insulation: The Gap in Creepage and Clearance Definitions<\/h2>\n

One of the most frequent discussion points centers on the lack of clear definitions within IEC 60664 regarding printed circuit boards (PCBs) versus other types of circuits when evaluating creepage and clearance distances.<\/p>\n

\"\"<\/p>\n

Source: AI-generated image created using Google Gemini.<\/p>\n

When it comes to PCBs, alternative standards like IPC-2221C tend to handle this far better. IPC-2221C provides a logical build-up of different isolation changes based on real-world manufacturing variables, <\/span><\/span>such as whether solder masks are used, if conformal coatings are applied, and how the overall isolation barrier is systematically constructed step-by-step. IEC 60664 could benefit immensely from adopting a similar, modular approach.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Voltage Difference (Peak DC or AC)<\/strong><\/p>\n<\/td>\n

\n

Internal Conductors (Category B1)<\/strong><\/p>\n<\/td>\n

\n

External Conductors, Uncoated (Category B2)<\/strong><\/p>\n<\/td>\n

\n

External Conductors, Coated (Category B4)<\/strong><\/p>\n<\/td>\n<\/tr>\n

\n

0 \u2013 15 V<\/p>\n<\/td>\n

\n

0.05 mm<\/p>\n<\/td>\n

\n

0.10 mm<\/p>\n<\/td>\n

\n

0.05 mm<\/p>\n<\/td>\n<\/tr>\n

\n

16 \u2013 30 V<\/p>\n<\/td>\n

\n

0.05 mm<\/p>\n<\/td>\n

\n

0.10 mm<\/p>\n<\/td>\n

\n

0.05 mm<\/p>\n<\/td>\n<\/tr>\n

\n

31 \u2013 50 V<\/p>\n<\/td>\n

\n

0.10 mm<\/p>\n<\/td>\n

\n

0.60 mm<\/p>\n<\/td>\n

\n

0.13 mm<\/p>\n<\/td>\n<\/tr>\n

\n

51 \u2013 100 V<\/p>\n<\/td>\n

\n

0.10 mm<\/p>\n<\/td>\n

\n

0.60 mm<\/p>\n<\/td>\n

\n

0.13 mm<\/p>\n<\/td>\n<\/tr>\n

\n

101 \u2013 150 V<\/p>\n<\/td>\n

\n

0.20 mm<\/p>\n<\/td>\n

\n

0.60 mm<\/p>\n<\/td>\n

\n

0.40 mm<\/p>\n<\/td>\n<\/tr>\n

\n

151 \u2013 170 V<\/p>\n<\/td>\n

\n

0.20 mm<\/p>\n<\/td>\n

\n

1.25 mm<\/p>\n<\/td>\n

\n

0.40 mm<\/p>\n<\/td>\n<\/tr>\n

\n

171 \u2013 250 V<\/p>\n<\/td>\n

\n

0.20 mm<\/p>\n<\/td>\n

\n

1.25 mm<\/p>\n<\/td>\n

\n

0.40 mm<\/p>\n<\/td>\n<\/tr>\n

\n

251 \u2013 300 V<\/p>\n<\/td>\n

\n

0.20 mm<\/p>\n<\/td>\n

\n

1.25 mm<\/p>\n<\/td>\n

\n

0.40 mm<\/p>\n<\/td>\n<\/tr>\n

\n

301 \u2013 500 V<\/p>\n<\/td>\n

\n

0.25 mm<\/p>\n<\/td>\n

\n

2.50 mm<\/p>\n<\/td>\n

\n

0.80 mm<\/p>\n<\/td>\n<\/tr>\n

\n

Above 500 V<\/p>\n<\/td>\n

\n

Add 0.0025 mm \/ V<\/p>\n<\/td>\n

\n

Add 0.0050 mm \/ V<\/p>\n<\/td>\n

\n

Add 0.00305 mm \/ V<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

IPC-2221 Table 6.1 \u2013 Electrical Conductor Spacing<\/p>\n

Note: B1 applies to internal layers, B2 to uncoated external traces, and B4 to coated external traces (e.g., solder mask or conformal coating).<\/p>\n

2. High-Frequency Insulation Coordination: Clearance Distances and Dielectric Strength<\/span><\/span><\/h2>\n

As power electronics evolve, high-frequency performance has become critical. While Part 4 of the IEC 60664 family addresses high-frequency considerations, it remains heavily theoretical and difficult to apply practically.<\/p>\n

At higher frequencies, the degradation of insulation capability and required safety margins change significantly:<\/p>\n